Expert Care for your Heating & Air! Spring Summer Fall Winter We Do It All!
Expert Care for your Heating & Air! Spring Summer Fall Winter We Do It All!
HEAT EXCHANGER will be inspected for cracks and deterioration. Heat exchangers can develop cracks with age and normal use. If they exist, there is a risk of serious illness from the toxic fumes emitted into your home.
BURNERS will be inspected for rust build up and deterioration. Dirty burners can cause the displacement of gas and poor combustion.
BURNER OPERATION will be inspected for proper combustion and smooth operation. We will adjust burner air shutters if needed to obtain complete combustion.
GAS VALVE will be inspected and tested for proper operation. This will ensure proper ignition and burners will operate in a safe and efficient manner.
GAS LINE will be inspected and leaked checked from the furnace shut off ball valve to the burner. This will ensure the piping is leak free from explosive gas.
PILOT will be cleaned and adjusted if needed. A dirty pilot will cause a weak flame and can be easily extinguished causing the furnace to shut down and run the blower.
THERMOCOUPLE will be inspected for carbon build up and cleaned. The thermocouple will cause the furnace to shut down if defected.
SAFETY CONTROLS will be checked and tested to ensure safe operation. Safety controls that do not function properly can increase operation cost and cause other components to malfunction.
FLUE PIPE will be inspected for acidic corrosion and leaks. Insufficient Venting of carbon monoxide can lead to a cracked heat ex-changer.
BLOWER WHEELS will be inspected for dirt build up and alignment.
BLOWER MOTOR will be inspected and lubricated. Dry bearings will cause premature failure.
CAPACITORS will be tested. Weak capacitors will cause motor to over heat and consume excessive energy.
MANIFOLD GAS PRESSURE proper pressure is required to control fuel input to the burner. Excessive gas pressure will increase operating cost.
AIR FILTERS will be inspected and replaced at customer's option. Dirty air filters will reduce air flow and over all system operation.
TEMPERATURE RISE will be checked to ensure it is within manufacture specifications. This will eliminate short cycling and over heating of the heat exchanger.
TEMPERATURE RISE will be checked to ensure it is within manufacture specifications. This will eliminate short cycling and over heating of the heat exchanger.
THERMOSTAT will be checked and calibrated as required. Defective or improperly calibrated thermostat will affect comfort and operating cost.
PRESSURE SWITCH will be inspected and air tubes cleaned.
RELAYS AND CONTRACTORS will be inspected. Pitted contacts can lead to over heating of wiring and possibly shorting out components.
INTEGRATED WIRING will be inspected for frail or discolored burnt spots. Loose connections will be tightened.
DUCT WORK will be visual inspected for air leaks and infiltration. Air leaks in the duct system will reduce over all system capacity and increase operating cost.
Copyright © 2021, Henrys Top Notch Air Conditioning & Heating CO
All Rights Reserved. TACL:#B29190E
Created by Henry Buss Jr at Henry's Top Notch Air